20 Pack Professional RG59/66 BNC Twist On connector

Special Promotion for CCTV installers.

Email us to inquire about Camera, cable and DVR deals.

Features:

BNC / Coax Twist On Male Plug for RG59/66. Use this male BNC twist on terminator for RG59/66 cables. Quicker and easier to use than crimp style. Brand new, professional grade, top quality.

Use for RG59 Coax cable or RG59 18/2 Siamese cable. No special tools required.

Specifications:

Connector Type:

BNC Twist on Male for RG59/66

Electrical Specifications:
Voltage Rating: AC 500V
Nominal Impedance: 50 Ohms
Withstanding Voltage: 1500V RMS
Insulation Resistance: 5000 Mohms min.
Frequency Range: 0-4 GHz

Material:
Body/housing: Nickel plated phosphor bronze
Contacts: Brass

Assembly Instructions:

Strip cable as shown. Be careful not to nick center conductor or outer braid. Twist outer braid in a clockwise direction so that at least 1/32" of cable dielectric is bared, and braid is left flat. (stray or loose braid can cause shorts.) Gently insert center conductor into back end of connector, "feeling" it into the guide hole. (if center conductor is not properly in place, about 1/8" of center conductor will show at the back end. Reinsert until cable dielectric reaches position shown in illustration.) Push the cable firmly in place (as far as possible). Then screw the connector onto the cable in a clockwise direction until it stops. Assembly is complete.